Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of | ||||
dispatch), Treated Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in | ||||
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with | ||||
air pass groove and treated with special anti termite and water resistant lacquer. | ||||
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite | ||||
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the | ||||
two wings at 350 mm x 350 mm | ||||
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before | ||||
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect | ||||
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and | ||||
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by | ||||
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of | ||||
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls | ||||
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a | ||||
thin coat of water based police on the the face |
J P ENTERPRISES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |